Entry 01 Side by side
When the top oven cooks and the bottom one won't
A double wall oven is really two ovens sharing one cabinet, one control panel and one cooling path. Which half has failed, and how, already narrows the list before anyone unscrews a panel.
Option A
Only the lower cavity is dead
- The shared display, controls and power supply are clearly alive, so the fault usually lives in parts that serve the lower half alone.
- Suspects move to the lower bake or broil element, its temperature sensor, the wiring behind it, or the relay on the board that drives that one cavity.
- If the lower door stayed locked after a self-clean, the latch motor and its switch are looked at before anything else.
- You can normally keep cooking upstairs while you wait, as long as nothing scorches, sparks or trips the breaker.
Option B
Both cavities are acting up
- Two halves failing together points away from elements and toward the shared hardware: main electronics, display glass, cooling blower, incoming power.
- A dead leg on the oven's two-leg supply can keep lamps and display glowing while neither cavity warms up.
- An overheated cavity can trip a thermal cutoff that stops heat across the whole appliance until the cause is found.
- Look at the breaker panel before calling; if that breaker trips again, leave it off.
Entry noteEither way it is one appliance in one wall, billed as one trip. Tell the dispatcher which half does what: “top bakes, bottom stays cold on convection” is far more useful than “the oven is broken”.