Entry 01 Procedure
Habits that keep scale out of the steam system
Every time water turns to vapor, its minerals stay behind. These small routines keep them from settling where they cause trouble.
-
Pour fresh water for each cook
Fill the tank with cold, fresh water every time instead of topping up whatever has been sitting in it.
-
Empty the tank afterwards
Tip out what is left, wipe the tank and leave it to dry in the air. Standing water leaves mineral rings and can grow a slimy film.
-
Dry the cavity
After the oven cools down, mop up condensation from the floor and the door seal, then leave the door open a crack.
-
Answer the descale reminder
When the display asks for descaling, run the cycle soon instead of dismissing the message for weeks.
-
Use the product the manual names
Mix the descaler exactly as your Use & Care guide says. Substitutes can be too weak to dissolve scale or too harsh on seals and the steam generator.
-
Finish every rinse
Let the cycle complete all of its rinse stages so no descaler residue ends up in the next meal.
Logged reply1 / 3
Does hard water affect a steam oven?
Yes. Boiling water into vapor leaves its minerals behind, and they harden into scale inside the steam generator, on the sensors and through the water lines. Over time scale slows steam production, can confuse the oven's water sensing and eventually blocks parts outright. Descaling whenever the oven prompts is the main defense, and harder water builds scale faster.